E-Z DRILL 210B 2021

Description

Drill 5/8- to 2-1/2-inch holes 18 inches deep in a 4-foot patch with the only on-grade drill on the market with these capabilities – the 210B. It requires just 100 cfm to operate, and the dual-purpose guide wheels transition simply from on-grade positioning to easy transportation around the jobsite. With its adjustable drill height you can drill into the center of slabs that are 6 to 24 inches thick.

Model 210B
Lower Length (A) 51 3/8" (130.5 cm) 24 1/2" (62.2 cm)
Lower Length w/ back wheel removed 46" (116.8 cm) N/A
Width (B) 12" (30.5 cm) 30” (76.2 cm)
Height (C) 30" (76.2 cm) 56” (142.2 cm)
Weight 285 lbs (129.4 kg)
Drill distance from corner 6" (15.2 cm) 3" (7.6 cm)
Drill distance from ground 3" (7.6 cm) up to 12” (30.5 cm)
Drill depth (std.) 18" (45.7 cm)
Drill bit diameter 5/8" to 2 1/2" (15.9 mm to 63.5 mm)
Drill motor (pneumatic) CP 32A
Weight 54 lbs (24.5 kg)
Chuck size (std.) 7/8" x 3 1/4" (22.2 mm x 82.6 mm)
Air consumption (minimum) 100 cfm (2.8m3/min)
Operating pressure 90 psi (6.2 bar)
Impact (ft. lbs./blow) 36 fpb (49.0 J)
Blows/minute 2200 bpm
Rotations/minute 288 rpm
Horizontal Position >> Vertical Position >